TA tactical jackets

The TA protective suit "Technical Assistance" has been especially developed for technical rescue purposes.
This TA protective suit is highly visible. This is achieved through the use of hi-vis upper materials in luminous orange or yellow in conjunction with the corresponding high-contrasting reflective yellow/silver/yellow. In addition, the following functional equipment features are integrated in the TA protective suit:

  • oil and water-repellent finish
  • reflective tape based on HuPF parts 1 and 4
  • hi-vis vest exemption according to DGUV
  • pre-shaped knee with darts and PU carbon knee reinforcement with inside pocket for optional knee pads

Cut and stab protection in the area of the forearms.

Excerpt from detailed image 4: reinforced elbow area, cut and stab protection in the area of the forearms

The Airtex® membrane incorporated in the TA suit provides protection against virus and bacteria (tested on new suit) and ensures a breathable and waterproof wearing comfort.

Upper material:

Cotton/hi-vis polyester FR (Proban®), water-repellent due to FC finish (Teflon™)

Upper material colour variants:

TA jacket Art No. 19-150-09

Material

Art No.19-150:

outer fabric: 100% cotton FR (Proban®)
membrane: knitted fabric, 100% polyester, PU coated
inner lining: 100% cotton FR
reflective tape: yellow-silver-yellow, silver FR

  • colour code (09): gold

Article Description

  • additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • reinforced elbow area
  • integrated storm bar on the collar
  • fitted radio pocket on the right with Velcro strip on the flap for name badge
  • lamp holder
  • patched radio pocket on the left with a flap
  • antenna holder for handheld radios
  • inspection opening (enables easy access for monitoring the membrane)
  • loop for snap-hook
  • two fitted side pockets with flaps
  • two inside pockets with YKK® metal zip
  • hanging loop
  • sewn-in label on the inside for writing the personal name
  • high wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • detachable "FIRE BRIGADE" back label

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use only colour detergent
  • use only small amounts of detergent
  • rinse out detergent residues thoroughly
  • do not wash separately
  • do not tumble dry
  • iron after washing

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • do not tumble dry
  • iron at moderate heat at 150°C (2 points) to reactivates the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • do not dry clean

TA jacket Art No. 19-160-71

Material

Art No.19-160:

outer fabric: 100% cotton FR (Proban®)
outer fabric hi-vis material: 50% cotton/50% polyester
membrane: knitted fabric, 100% polyester, PU coated
inner lining: 100% cotton FR
reflective tape: yellow-silver-yellow, silver FR

  • colour code (71): black-blue/luminous orange

Article Description

  • additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • collar of contrasting colour in hi-vis luminous orange, red or yellow
  • reinforced elbow area
  • integrated storm bar on the collar
  • fitted radio pocket on the right with Velcro strip on the flap for name badge
  • lamp holder
  • patched radio pocket on the left with a flap
  • antenna holder for handheld radios
  • inspection opening (enables easy access for monitoring the membrane)
  • loop for snap-hook
  • two fitted side pockets with flaps
  • two inside pockets with YKK® metal zip
  • hanging loop
  • sewn-in label on the inside for writing the personal name
  • high wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • detachable "FIRE BRIGADE" back label

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS EN 16689:2017, Protective clothing for technical assistance
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use only colour detergent
  • use only small amounts of detergent
  • rinse out detergent residues thoroughly
  • do not wash separately
  • do not tumble dry
  • iron after washing

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • do not tumble dry
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • do not dry clean

TA jacket Art No. 19-160-66

Material

Art No.19-160:

outer fabric: 100% cotton FR (Proban®)
outer fabric hi-vis material: 50% cotton/50% polyester
membrane: knitted fabric, 100% polyester, PU coated
inner lining: 100% cotton FR
reflective tape: yellow-silver-yellow, silver FR

  • colour code (66): black-blue/luminous yellow

Article Description

  • additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • collar of contrasting colour in hi-vis luminous orange, red or yellow
  • reinforced elbow area
  • integrated storm bar on the collar
  • fitted radio pocket on the right with Velcro strip on the flap for name badge
  • lamp holder
  • patched radio pocket on the left with a flap
  • antenna holder for handheld radios
  • inspection opening (enables easy access for monitoring the membrane)
  • loop for snap-hook
  • two fitted side pockets with flaps
  • two inside pockets with YKK® metal zip
  • hanging loop
  • sewn-in label on the inside for writing the personal name
  • high wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • detachable "FIRE BRIGADE" back label

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS EN 16689:2017, Protective clothing for technical assistance
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use only colour detergent
  • use only small amounts of detergent
  • rinse out detergent residues thoroughly
  • do not wash separately
  • do not tumble dry
  • iron after washing

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • do not tumble dry
  • iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • do not dry clean

TA jacket Art No. 19-150-01

Material

Art No.19-150:

outer fabric: 100% cotton FR (Proban®)
membrane: knitted fabric, 100% polyester, PU coated
lining: 100% cotton FR
reflective tape: yellow-silver-yellow, silver FR

  • colour code (01): black-blue

Article Description

  • additional cut and stab protection in the area of the forearms, according to EN 388:2017
  • reinforced elbow area
  • integrated storm bar on the collar
  • fitted radio pocket on the right with Velcro strip on the flap for name badge
  • lamp holder
  • patched radio pocket on the left with a flap
  • antenna holder for handheld radios
  • inspection opening (enables easy access for monitoring the membrane)
  • loop for snap-hook
  • two fitted side pockets with flaps
  • two inside pockets with YKK® metal zip
  • hanging loop
  • sewn-in label on the inside for writing the personal name
  • high wearing comfort due to large golf pleats at the back
  • YKK® metal zip concealed by front panel
  • detachable "FIRE BRIGADE" back label

360 degree view 360 degree view

Standards/dimension tables/declarations of conformity

  • BS EN ISO 11612:2015, PPE for work exposed to heat
  • BS EN ISO 14116:2015, limited flame spread
  • BS ISO 16604: 2004, virus protection (tested when new)
  • BS EN ISO 22610 + 22612, bacterial protection (tested when new)
  • BS EN ISO 388:2017 + BS EN ISO 13997, testing against mechanical risks, i.e. resistance to cuts and sharp objects
  • BS EN 343:2003 + A1:2007 + AC:2009, protection against rain

Sizes Available

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

Care instructions

before and after washing instructions:

  • empty pockets
  • close zips, Velcro and button fasteners
  • remove snap-hook
  • turn clothing inside out (lining facing outwards)
  • use only colour detergent
  • use only small amounts of detergent
  • rinse out detergent residues thoroughly
  • do not wash separately
  • do not tumble dry
  • iron after washing

care instructions:

  • gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
  • do not bleach
  • do not tumble dry
  • iron at moderate heat at 150°C (2 points) to reactivates the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
  • do not dry clean