• thermal insulation right through to the front panel
• wide front panel with Velcro fastener
• panic zip
• fitted radio pocket on left side of chest, adjustable at two heights, with securing Velcro strap
• pocket pouches and flaps with functional membrane
• patch-style inside pocket with Velcro fastener
• large turn-down collar with Velcro width adjustment
• large arm movement wedge with complete functional structure, also in the thermal insulation layers
• moisture barrier in the jacket hem
• oil and water-repellent finish
• washing and cleaning resistant
• detachable fluorescent, neon yellow "FIRE BRIGADE" rear label
• hanging loop
• Velcro fastening for width-adjustment of sleeves
• knitted cuffs with thumb loops

All protective jackets, including the short versions, are approved with all Novotex Isomat protective pants.

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

before and after washing instructions:

• empty pockets
• close zips, Velcro and button fasteners
• remove snap-hook
• turn clothing inside out (lining facing outwards)
• use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
• do not use fabric softener
• do not use bleach
• rinse out detergent residues thoroughly
• air dry if possible
• do not staple on labels
• re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

• gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
• do not bleach
• drying with reduced thermal stress
• iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
• gentle dry cleaning with perchlorethylene

fire brigade protective pants DIN EN 469 11-334 "click here"

• thermal insulation right through to the front panel
• wide front panel with Velcro fastener
• panic zip
• fitted radio pocket on left side of chest, adjustable at two heights, with securing Velcro strap
• pocket pouches and flaps with functional membrane
• patch-style inside pocket with Velcro fastener
• large turn-down collar with Velcro width adjustment
• large arm movement wedge with complete functional structure, also in the thermal insulation layers
• moisture barrier in the jacket hem
• oil and water-repellent finish
• washing and cleaning resistant
• detachable fluorescent, neon yellow "FIRE BRIGADE" rear label
• hanging loop
• Velcro fastening for width-adjustment of sleeves
• knitted cuffs with thumb loops

All protective jackets, including the short versions, are approved with all Novotex Isomat protective pants.

normal sizes: 40-68 short sizes: K44-K68 long sizes: L44-L68

before and after washing instructions:

• empty pockets
• close zips, Velcro and button fasteners
• remove snap-hook
• turn clothing inside out (lining facing outwards)
• use mild/colour detergent without an optical brightener (if possible, clean the black-blue outer fabric (colour code 01) using a detergent for black clothes))
• do not use fabric softener
• do not use bleach
• rinse out detergent residues thoroughly
• air dry if possible
• do not staple on labels
• re-impregnation recommended after 5 washes (turn clothing inside out again for this process)

care instructions:

• gentle cycle at a maximum temperature of 60°C, normal mechanics, normal rinsing, normal spinning
• do not bleach
• drying with reduced thermal stress
• iron at moderate heat at 150°C (2 points) to reactivate the outer fabric's water and dirt-repellent finish; do not iron over the reflective stripes
• gentle dry cleaning with perchlorethylene